Android mainboards · Touch displays · Firmware — since 2013
E-paper · room booking

Door signs and room displays that barely use power.

Meeting-room and office signs change a few times a day. E-paper holds the image without power and updates when the schedule does. Room booking from LUMA AI Studio starts field samples in November 2026 and launches officially at ISE in February 2027.

E-paper display used as a wall sign in an office corridor
How it works

The schedule changes, the sign follows.

Room schedules and notices come from the e-paper content system — or, from 2027, LUMA AI Studio room booking. The sign updates when the schedule changes and holds the image in between without power.

  1. ScheduleE-paper content system; LUMA room booking from 2027
  2. NetworkWi-Fi to every sign
  3. ControllerAndroid on RK3566, 2 GB / 16 GB
  4. E-paper sign13", 25.3" or 32", battery models available
What it needs

The checklist we build to.

  • Signs that need almost no power
  • Battery-powered e-paper models
  • A dedicated e-paper content system
  • Readable in bright corridors and lobbies
  • Room booking integration (from 2027)
Use cases

Where this hardware works.

Common applications by industry, and the setup we would typically build for each. Every project starts from your site, so sizes and parts change with it.

Offices

Meeting-room door signs

The sign at the door shows today's bookings and whether the room is free.

Typical setup
A battery e-paper sign per room, with the schedule from the e-paper content system.
What matters here
No cable at every door, readable at a glance.
Offices

Room booking at the door

Staff see the schedule and book a free room on the spot.

Typical setup
A small touch display at the door with LUMA AI Studio room booking — field samples from November 2026, launch in February 2027.
What matters here
Booking where the meeting happens.
Lobbies and corridors

Floor directories and wayfinding

Floor plans, tenant lists and directions in the lobby and on each floor.

Typical setup
25.3" or 32" e-paper boards in the lobby, 13" signs in corridors.
What matters here
Clear in bright light, on almost no power.
Factories and logistics

Work instructions and status boards

Work instructions, kanban cards and process status at each station, updated when the plan changes.

Typical setup
E-paper boards at the stations, updated over Wi-Fi.
What matters here
Changes a few times a shift, on almost no power.
Hospitals

Room and ward signs

Signs at rooms and wards show schedules, the care team and notices.

Typical setup
13" e-paper signs at doors and larger boards at nurse stations.
What matters here
Quiet, glare-free and easy to update.
Retail and hospitality

Posters and menus on e-paper

Promotions, menus and product information on e-paper posters that change without reprinting.

Typical setup
25.3" or 32" e-paper boards, with battery models where there is no outlet.
What matters here
A paper-like look with no printing and almost no power.
Why iTEMP

One team, from the board to the software.

A typical rollout stitches together a board vendor, a panel supplier, a firmware contractor and a software team. We design the board, build the display and write the firmware ourselves, then integrate your software — so when something has to change, one team changes it.

  1. Test fixture used to check boards and modules before final assembly
    01 BoardDesigned in-house

    An RK3566 e-paper controller designed in-house.

  2. Technicians assembling and adjusting Android touch displays on the line
    02 Display and enclosureBuilt in our factory

    E-paper panels from 13 to 32 inches, mains or battery powered.

  3. // ItempApiPub — office hours
    setPowerOnTime(ctx, "7", "30", "0", true);
    setPowerOffTime(ctx, "20", "0", "0", true);
    
    // e-paper keeps the last image
    // while the board is off
    03 FirmwareWritten by our team

    Android firmware with scheduled power and remote updates.

  4. 10-inch units on burn-in racks during quality control
    04 Software and testingIntegrated and burned in

    A dedicated e-paper content system today; LUMA room booking field samples from November 2026, launch at ISE in February 2027.

Custom development

Built to your spec.

Standard products ship as they are. For a project, any of these can change — and because the board, display and firmware are ours, the change is made at the source.

How a custom project runs

  • Sign size and mounting
  • Battery or mains power
  • Your layouts and branding
  • Door-sign deployments, built on request
  • Touch displays for room booking (from 2027)
  • The dedicated e-paper content system, ready today
Products

Hardware for this job.

A dedicated e-paper content management system is ready; door-sign deployments are built on request.

FAQ

Smart Office

Does an e-paper sign need a power cable?

No — battery-powered e-paper models are available, and a dedicated e-paper content management system is ready. Door-sign deployments are built on request.

When is room booking available?

Field samples from November 2026; official launch at ISE in February 2027.

Can e-paper show video?

No — e-paper is made for content that changes a few times a day. For video, choose an LCD display.

Which e-paper sizes are available?

13-inch (1200×1600), 25.3-inch (3200×1800) and 32-inch (2560×1440).